Procedure for 

Phase A: heat up water to 50-60°C and add AGENAJEL (add PURABEET if intended) while intense stirring. Make a premix of xanthan gum and glycerin. Add it to the water phase while intense stirring. Cool down to 30°C. Add benzyl alcohol.

Mix Phase B with low stirring and heat to 50°C until clear. Add Phase B into Phase A and homogenized moderate until homogenous (for example 5 minutes with turbine stirrer at 1000 rpm under vacuum). Cool down to RT.

Adjust pH with NaOH or citric acid to pH 6. Full up in tubes.

The post Natural Shower Gel – Moderate Warm Process appeared first on -Glenn Corp-.

AGENAJEL 20.383 (conventional) can be used to thicken skin friendly surfactant solutions.

Procedure for Natural Shower Gel with AGENAJEL 20.383

Combine Phase A with low stirring and heat up to 90°C (holding time 15 minutes) whilst stirring and cool down to 30°C. Mix Phase B with low stirring and heat up to 50°C. Add Phase B into Phase A and homogenize moderately until homogenous (for example 5 minutes with turbine stirrer at 1000 rpm under vacuum). Adjust the pH with NaOH or citric acid to pH 6. Fill up into tubes.

The post Natural Shower Gel with AGENAJEL 20.383 appeared first on -Glenn Corp-.

It can be used on the skin and hair, as it brings in its composition two active ingredients, Murumuru Butter, which provides recovery of the skin’s natural elasticity by strengthening the skin barrier while promoting hydration and softness to the hair.

Procedure for Hybrid Beauty Hair Leave-In & Skin Moisturizer

1. .Mix the ingredients of phase (A) and heat until 75ºC – 80ºC.
2. In another beaker, weight all ingredients of phase (B) and heat until 75°C – 80°C.
3. Add phase (B) into phase (A) under stirring.
4. Start to cool down under medium stirring. Add phases (C) below 35°C.
5. Check the pH and adjust to 4.2-4.7, if necessary.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. COR 170-0921

The post Hybrid Beauty Hair Leave-In & Skin Moisturizer appeared first on -Glenn Corp-.

This formulation features the following ingredients:

• Beraclay Amazonian White Clay: a natural clay found in the brazilian biome, collected from the Marajó shore, in the Amazon river. This clay is rich in unsaponifiable fractions of organic particles and forest nutrients. It has a peculiar mineral composition, due to its geographical location. Promotes a cooling sensation.
• Beraclay Light Green: contains Montmorillonite which offers several benefits to the skin. It is also a useful component to formulas promoting benefits such as stability. It’s recommended for oily skin.
• Quartz Crystal Facial Scrub: is 100% natural and an alternative to polyethylene microbeads. It promotes a friction action, removing the layers of the dead cells and stimulating the renewal of the skin and stratum corneum.

Procedure for Mineral Cleansing Powder and Facial Exfoliating Mask

1. Weigh all the ingredients of Phase B and stir until completely homogenized.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. FAC 072-0217

The post Mineral Cleansing Powder and Facial Exfoliating Mask appeared first on -Glenn Corp-.

The post Nature-inspired Color Tint Multibalm appeared first on -Glenn Corp-.

Procedure for VersaGroom

Melt Phase A (85°C). Add Phase B. Mix Phase A/B at 85°C until homogeneous. Pour into suitable containers and allow to cool.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Curl, I’m Not Playing with You!

VersaGroom Formulation

The post VersaGroom appeared first on -Glenn Corp-.

This formulation features D.S.A. 7 Black 20%. D.S.A. 7 colored starches are based on physically activated rice starch D.S.A.7. The colored starches can be easily combined with D.S.A.7 or lipophilic starch like AGENAFLO OS 9051 in order to combine cleansing effects with covering characteristics. The addition of Cetrimonium Chloride provides improved conditioning and attraction to the hair.

How to Use: Apply to dry hair.

Procedure for Black Dry Shampoo and Conditioner

1. Weigh the ingredients of Phase A in a suitable container and stir slowly until completely homogenized.
2. Add Phase B to phase A and stir until completely homogenized.
3. Add Phase C to phases A and B during the filling operation.

Specifications

Appearance: Black liquid

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Curl, I’m Not Playing with You!

Black Dry Shampoo and Conditioner Formulation No. A10-160916-02

The post Black Dry Shampoo and Conditioner appeared first on -Glenn Corp-.

This non-foaming formula is enriched with a host of natural ingredients — most notably being Aloe, Almond oil, and natural-based Butylene Glycol — that promotes moisture and nourishing to your skin. After the shaving, highly concentrated Vitamin C protects the skin from oxidative stress caused by environmental pollution. Zea mays (corn) starch gives an extraordinary silky and powdery after skin-feel. This starch is well-known for its sebum absorption property which makes it suitable for use for oily and sensitive skin.

MAISITA 9040 is a native COSMOS certified Zea mays (corn) starch with exceptional silky and powdery- dry, smooth skin after-feel. It helps to control residual shine of oily skin combined with perceivable tackiness/stickiness reduction. MASITA 9040 is used after manufacture (40C and below) to gain all product benefits as described without changing the rheological profile.

Procedure for Non-Foaming Face and Body Shave Cream

1. Heat phases A and B up to 70°C.
2. Add phase A to phase B and homogenize.
3. At 30-40°C homogenize again.
4. Add phase C to phase AB.
5. Adjust pH to 7.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Formulating for Men, Why, and How!

Formulation No. 801-1-1

The post Non-Foaming Face and Body Shave Cream appeared first on -Glenn Corp-.

This formulation features RICE PO4 Natural which is a special starch (phosphate cross-linked starch) based on rice used for applications in cosmetics. This ingredient shows a very good opacity, adhesion, and creaminess and does not clog the skin pores. Because of the non-swelling property of this product, the lumens of the pores do not widen, even after long-term application (contrary to native rice starch).

Procedure for Hair, Beard, and Moustache Wax for Men

1. Weigh the ingredients of phase A in a suitable container and heat until 75-80°C. A
2. Add phase B to phase A and homogenize.
3. Let A and B cool down until 60 °C then add ingredients of phase C and homogenize.
4. Fill the formula in molds immediately while it is still hot.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Formulating for Men, Why, and How!

The post Hair, Beard, and Moustache Wax for Men appeared first on -Glenn Corp-.

ANTIL® Soft SC is a multifunctional natural-based additive for surfactant formulations with excellent thickening and foam boosting properties, also in PEG-free systems. It improves foam creaminess and skin feel. TEGO® Betain F 50 is a very pure, concentrated surfactant. It is microbiologically stable without preservatives and has good thickening properties.

Procedure for Hair and Body Shampoo PEG & Sulfate Free

Mix the ingredients in the given order at ~40°C. Adjust the pH value with citric acid to 5.0.

Remarks

Viscosity: 3,600 mPas (Brookfield)

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Clear Concepts for Clean Beauty!

Formulation No. AK 175/9

The post Hair and Body Shampoo PEG & Sulfate Free appeared first on -Glenn Corp-.