It can be used on the skin and hair, as it brings in its composition two active ingredients, Murumuru Butter, which provides recovery of the skin’s natural elasticity by strengthening the skin barrier while promoting hydration and softness to the hair.

Procedure for Hybrid Beauty Hair Leave-In & Skin Moisturizer

1. .Mix the ingredients of phase (A) and heat until 75ºC – 80ºC.
2. In another beaker, weight all ingredients of phase (B) and heat until 75°C – 80°C.
3. Add phase (B) into phase (A) under stirring.
4. Start to cool down under medium stirring. Add phases (C) below 35°C.
5. Check the pH and adjust to 4.2-4.7, if necessary.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. COR 170-0921

The post Hybrid Beauty Hair Leave-In & Skin Moisturizer appeared first on -Glenn Corp-.

Procedure for Bar Soap – Cold Process

1. In an auxiliary beaker, weight the components of phase (C), water and sodium hydroxide, in this sequence and mix until homogeneous.*
2. Mix the components of phase (A) in a separate beaker and heat up to 75ºC-80ºC.
3. Add phase (C) into (A) under stirring.
4. Below 40ºC, pour phase (B) into phase (A+C) and homogenize gently. Keep under stirring until the soap’s viscosity increases.
5. Divide the mixture into equal parts and add the clays to each one. Stir each part until they are fully homogeneous.
6. When placing the formulation in the mold, carry out the chosen decoration technique.
7. Wait 6 weeks to unmold.

*Always add the sodium hydroxide into the water, NEVER the other way around. This is an exothermic reaction: releases heat and gas!

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. COR 061-0221

The post Bar Soap – Cold Process appeared first on -Glenn Corp-.

Beraclay Light Green contains Montmorillonite which offers several benefits to the skin. It is also a useful component to formulas promoting benefits such as stability. It is highly recommended for oily skin. Its colloidal structure forms two silicate layers, composed of small particles (smaller than the particles of other minerals).

Ethience® Protect is the eco-conscious barrier function balancer. It focuses on the skin’s three structural layers. It is obtained from a co-product of sustainable Brazil Nut oil production.

Procedure for After Shave Gel with Ethience Protect

1. Mix the ingredients of phase (A) and homogenize.
2. Disperse phase (B) into phase (A) under stirring and homogenize it for 15 min. with medium stirring.
3. Add phase (C) into (A+B) under stirring and homogenize until form the gel.
4. Add phases (D) and (F) into the phase (A+B+C) while stirring.
5. Check the pH and if necessary, adjust to 5.0-5.5.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. FAC 122-0521

The post After Shave Gel with Ethience Protect appeared first on -Glenn Corp-.

Amazonian White Clay is a natural clay found in the Brazilian Biome, collected from the Marajó shore, in the Amazon river mouth. This clay is rich in nutrients and unsaponifiable fractions of organic particles and forest nutrients. It has a peculiar mineral composition, due to its geographical location. It is a light exfoliating agent that has great capacity of enhancing the sensory profile of emulsions.

Procedure for Simple Clay Mask with Amazonian White Clay

1. Heat the water until 80ºC. Remove the heating, add the Magnesium Aluminum Silicate slowly under continuous stirring and homogenize for 30 minutes phase A1
2. Disperse phase A2 into A1 and homogenize for 10 minutes.
3. Pre-mix phase B and add into (A1+A2) when it starts to cool down under medium stirring
4.  Then add phase C.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. FAC 104-1019

The post Simple Clay Mask with Amazonian White Clay appeared first on -Glenn Corp-.

Amazonian White Clay is a natural clay found in the Brazilian Biome, collected from the Marajó shore, in the Amazon river mouth. This clay is rich in nutrients and unsaponifiable fractions of organic particles and forest nutrients. It has a peculiar mineral composition, due to its geographical location. It is a light exfoliating agent that has great capacity of enhancing the sensory profile of emulsions.

Beraclay Light Green contains Montmorillonite which offers several benefits to the skin. It is also a useful component to formulas promoting benefits such as stability. It is highly recommended for oily skin. Its colloidal structure forms two silicate layers, composed of small particles (smaller than the particles of other minerals).

Procedure for Powder Shampoo with Amazonian White Clay

1. Weigh all the ingredients of Phase A and stir until completely homogenized.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. CAP 096-0719

The post Powder Shampoo with Amazonian White Clay appeared first on -Glenn Corp-.

Murumuru butter is rich in lauric, myristic, and oleic acids. It has moisturizing and restoration properties for hair due to high concentration of low molecular weight fatty acids.

Babaçu Oil is rich in lauric acid and helps to restore hydration in regions where there has been a disruption of the peptide chain.

Procedure for Body Butter with Beraclay Crude

1. Mix Phase A and B separately and heat up to 80°C
2. Add Phase B into A while stirring
3. Start to cool down under medium stirring. Add Phase C below 35°C

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. COR 060-1013_07

The post Body Butter with Beraclay Crude appeared first on -Glenn Corp-.

This formulation features the following ingredients:

• Tucumã Butter Refined: is an emollient rich in lauric and myristic acid, providing hydration with fast absorption by the skin. It is a natural alternative to the use of silicones, being able to maintain equivalent or better sensorial profile of the silicones.
• Cupuacu Refined Butter:  acts as an emollient, providing a pleasant touch, softness, and smoothness to the skin, promoting the recovery of natural moisture and elasticity by strengthening the skin barrier.
• Beraclay Vanilla: has a pH very similar to the skin and its main benefit is purifying the skin and absorbing its debris.

Procedure for Hand Exfoliating Butter with Beraclay Vanilla

1. Mix Phase A and heat up to 75°C – 80°C.
2. Start to cool down under medium stirring and add Phase B below 55°C. Mix well and add Phase C.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. COR 153-1220

The post Hand Exfoliating Butter with Beraclay Vanilla appeared first on -Glenn Corp-.

Beraclay Old Rose is a mixture of gray and red clays. Its main effect is softness. It gently removes dirt and grime. The unique characteristic of Beraclay’s is the extraction process which is done through a selective and sustainable process where the region’s biodiversity is respected and maintained.

Procedure for Fresh Rose Gel After Peeling

1. Add Phase A and mix it well at around 600 rpm.
2. Add Phase B into Phase A under stirring until a gel is formed.
3. Add Phase C into Phase A+B under stirring.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. FAC 108-1220

The post Fresh Rose Gel After Peeling appeared first on -Glenn Corp-.

This formulation features the following ingredients:

• Amazonian White Clay: a natural clay found in the Brazilian biome, collected from the Marajó shore, in the Amazon river mouth. This clay is rich in unsaponifiable fractions of organic particles and forest nutrients. It has a peculiar mineral composition, due to its geographical location.
• Brazil Nut Oil: rich in unsaturated fatty acids with nutritional and moisturizing properties to the skin.
• Cupuaçu Butter Refined: acts as an emollient, providing a pleasant touch, softness, and smoothness to the skin barrier.

Procedure for Lip Balm & Scrub with Amazonian White Clay

1. Weigh all ingredients of Phase A and heat up to 75°C – 80°C until all the waxes and butters have melted and the phase is uniform.
2. Cool down to 50°C – 55°C while stirring.
3. Fill the lipstick mold while the formula is still in the liquid form.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. MAQ 013-0319

The post Lip Balm & Scrub with Amazonian White Clay appeared first on -Glenn Corp-.

The formulation features the following ingredients:

• Passion Fruit Oil: rich in unsaturated fatty acids with nutritional and moisturizing properties for the skin and hair. It can be used in formulations aimed at reducing oiliness from the skin.
• Murumuru Butter: rich in lauric, myristic, and oleic acids. It enables recovery of moisture and natural elasticity to the skin by strengthening the skin barrier, especially in dry and mistreated skin.
• Brazil Nut Oil: rich in unsaturated fatty acids with nutritional and moisturizing properties to the skin.

Procedure for Balm Make Up Remover

1. Mix Phase A ingredients and heat up to 75°C – 80°C.
2. Start cool down under medium stirring and add Phase B below 55°C.
3. Then pour in the mold around 50°C before the solidification.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Hair Care: More Diverse, Representative, and Inclusive!

Formulation No. FAC 100-0819_01

The post Balm Make Up Remover appeared first on -Glenn Corp-.