The post AEROSIL® 200 appeared first on -Glenn Corp-.

The post ALTER-EMULGEL appeared first on -Glenn Corp-.

Coming from wood pulp this is a modified cellulose making it a real renewable and biodegradable resource for the personal care industry. it has no impact on the lands overexploitation. The cellulose which is used to make it comes from certified and sustainable forests.

It is recognized as biodegradable within the scientific community. its degradation by microorganism has been extensively studied in a wide variety of environments including wastewater treatment facilities.

CelluloScrub is available in 4 grades 

• CelluloScrub L 1000
• CelluloScrub L 500
• CelluloScrub L  300
• CelluloScrub  L XLS

1000 is a white scrub that provides the same high performance of polyethylene (PE) beads. Celluloscrub, coming from wood pulp, is a modified cellulose making it a real renewable and biodegradable resource for the personal care industry. The Celluloscrub line can be used in any kind of personal care products for exfoliation purposes. it remains stable over time and does not interfere with the color and the pH of the product.

500 is a white scrub that provides the same high performance of polyethylene (PE) beads. Celluloscrub, coming from wood pulp, is a modified cellulose making it a real renewable and biodegradable resource for the personal care industry. The Celluloscrub line can be used in any kind of personal care products for exfoliation purposes. it remains stable over time and does not interfere with the color and the pH of the product.

300 is a white scrub that provides the same high performance of polyethylene (PE) beads. Celluloscrub, coming from wood pulp, is a modified cellulose making it a real renewable and biodegradable resource for the personal care industry. The Celluloscrub line can be used in any kind of personal care products for exfoliation purposes. it remains stable over time and does not interfere with the color and the pH of the product.

XLS acts as an exfoliating agent. It is designed for the cosmetic and toiletries manufacturers which need a natural and biodegradable exfoliator at a cost-effective price to replace polyethylene. It has a wide particle size dispersion adapted to mass market products and industrial cleansers. It is a renewable and biodegradable white scrub made from PEFC cellulose. It has the same characteristics or performance as the polyethylene used for scrubbing purposes: same color stability, same abrasiveness, same suspension capacities, and the same stability. Moreover, it has no impact on the pH value of the cosmetic products. Used in shower gels, hand soaps, bar soaps, and foot scrubs.

Other recommended products from this supplier:

The post CelluloScrub L appeared first on -Glenn Corp-.

Besides lipids the skin needs an optimal proportion of water to retain its softness and suppleness. The ability of the horny layer of the skin to absorb moisture depends on the moisturizing factors contained in the epidermis – the so-called “Natural Moisturizing Factors“ (NMF). The NMF is easily washed out by using soaps or other surfactants. This results in the premature desquamation of the epithelial cells and loss of suppleness.

Hydroregulative cosmetics can help to counteract this effect by substituting the natural substances that have been washed out. In the form of emulsions, these cosmetics are excellent preparations providing the skin with lipids and moisture.

The skin’s inherent NMF consists mainly of lactate and pyroglutaminate components. In LACTIL®, Sodium Lactate and Sodium PCA (2-pyrrolidone-5- carbonic acid) are the major functional components. In addition, LACTIL® contains glycine, urea, and niacinamide that further enhance moisturization.

Applications for LACTIL®

• Moisturizing creams and lotions
• Body creams and lotions
• Anti-aging creams
• Shower gels
• 2-in-1 shower/bath products
• Foaming baths

Formulation Tips

• This product is water-soluble and cold processable if the formulation type itself allows this
• Preparation of an O/W emulsion: LACTIL® is added to the emulsion during the cooling process at temperatures of 40 °C or lower
• Preparation of a W/O emulsion: LACTIL® is added to the water phase and the emulsion is prepared as usual

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Anti-Blue Light: The Digital Dilemma!

INCI: Sodium Lactate; Sodium PCA; Glycine; Fructose; Urea; Niacinamide; Inositol; Sodium Benzoate; Lactic Acid

The post LACTIL® appeared first on -Glenn Corp-.

Formula No. 069-16-04F

PROCEDURE:

1. Prepare phase D wetting the pigments with the binder;
2. Heat phase B up to 80°C-85°C and disperse the thickener of the phase B using a suitable dispersion
unit (e.g. Silverson, Ultra Turrax, etc.);
3. Add phase C into the main vessel under a suitable dispersion unit (e.g. Silverson, Ultra Turrax, etc.);
4. Add phase D into the main vessel and use the water of phase E to wash the phase D;
5. Re-heat the water phase up to 80-85°C;
6. Heat phase A up to 80-85°C and add it into the water phase under a suitable dispersion unit (e.g.
Silverson, Ultra Turrax, etc.) and mix for 3 minutes;
7. Add phase F into the main vessel under a suitable dispersion unit (e.g. Silverson, Ultra Turrax, etc.);
8. Cool down and add phase G while mixing.

The post BB Secret Cream appeared first on -Glenn Corp-.

Formula No. SG 7/12-8

PROCEDURE:

1. Disperse the pigments/powders homogeneously in phase B.
2. Heat phase A to approx. 85ºC.
3. Add phase B to phase A with stirring and keep the temperature.
4. Add phase C (80ºC or room temperature) to phase A/B slowly while stirring.
5. Homogenize for a short time.
6. Cool with gentle stirring below 30ºC and add phase D.
7. Homogenize again.

The post Moisture Caring BB Cream SPF 15 appeared first on -Glenn Corp-.

Formula No. JZ8-159

Procedure:

1. In secondary vessel combine phase A, start mixing, add phase B to phase A and, when uniform, add phase C to phase AB.
2. Heat this oil phase ABC to 80°C and then add phase D to it.
3. When phase ABCD is homogeneous, add phase E to it and mix until phase E is fully dissolved.
4. To the main vessel add Water and Glycerin of phase F, start mixing, add the Disodium EDTA and then add Xanthan Gum.
5. Heat phase F to 75°C with continued mixing and ensure it is homogeneous.
6. When both phases are at designated temperatures, slowly add phase ABCDE to phase F with prop mixing and then homogenize for 3 minutes.
7. Start cooling batch with center stir (prop) mixing and when < 50°C, add phase G items one by one to it with continued mixing.
8. Replace any water lost to evaporation and mix batch until smooth.

The post Oil-in-Water BB Cream with SPF 40 Sun Protection appeared first on -Glenn Corp-.

Formula No. JZ10-91B

Procedure:

1. To a secondary vessel, add phase A and start mixing. Add premixed phase B with mixing and then add phase C.
2. Start heating phase ABC to 75°C and add phase D, mixing well until uniform.
3. To the main vessel add phase E and mix until fully uniformly incorporated. Heat to 75°C.
4. When both phases are homogeneous at their designated temperature, very slowly add phase ABCD to phase E.
5. Homogenize phase ABCDE for 3 minutes and then switch to center-stir mixing.
6. Start to cool to room temperature and when the batch is below 50°C add phase F, mixing to uniformity.

The post Oil-in-Water SPF 50 BB Cream appeared first on -Glenn Corp-.

Natural origin content: 96%

This very light, slightly perfumed emulsion gently generates the skin.

The post Optimum Living Day Cream appeared first on -Glenn Corp-.

While gently mixing pigmented dry water at low to medium speed (paddle mixer or by hand) slowly add carrier mixture with emollients to pigmented dry water in small doses.

How to Use Turn powder into cream by rubbing powder with fingertips or cosmetic sponge/brush. Apply cream to face and blend quickly. Color will come out a bit orange or dark at first, but once dried it will tone down to appear much softer. Blend with a blush after blush has dried to achieve an even finish. Silica helps to reduce shine and excess sebum to prolong wear time and prevent acne.

The post Powder-to-Cream Formulation with AEROSIL® R 812 S appeared first on -Glenn Corp-.