Eurol® BT and OPUNTIA Oléoactif® protect and heal the skin’s damaged cutaneous hydro-lipid barrier.

Procedure for A Sprayable Caress

The post A Sprayable Caress appeared first on -Glenn Corp-.

Procedure for Baby Care Lotion to Powder

1. Prepare Part A and mixing until homogeneous, Heat up to 70 o C
2. Prepare Part B and heat up to 70 o C
3. Add Part B to Part A with stir for 15 minutes at high speed rate.
4. Cool down batch to room temperature.
5. Add Part C then mixing until homogeneous.
6. Prepare Part D and mixing until homogeneous

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Clear Concepts for Clean Beauty!

The post Baby Care Lotion to Powder appeared first on -Glenn Corp-.

This formulation features MAISITA 9060 which is produced from organic maize. These starches are used after emulsification/hot processing (below 40C) for aesthetic modification (feel, tack reduction, etc). Also, they are added to the water phase prior to heating, to provide thickening and rheology modification to the formula. It can also be used to create pickering emulsions.

Procedure for Organic Baby Powder with MAISITA 9060

1. Prepare phase A and mixing together (3000 rpms 1 minutes).
2. Mix Phase B and C and spray to Phase A.
3. Mixing together (3000 rpms 3 minutes)

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Clear Concepts for Clean Beauty!

The post Organic Baby Powder with MAISITA 9060 appeared first on -Glenn Corp-.

The formulation features CORN PO4 PH”B” which is a Di-starch phosphate ester on the base of cornstarch. This boiling-resistant conventional starch is a powder base for antimicrobial, disinfecting, astringent or keratolytic powder preparations like baby powder, loose face powders, body and foot powders, rouge, eyeshadow and compact powders. This ingredient has a long-lasting moisturizing effect and slow releases: DISTARCH PHOSPHATES ‘lock in’ moisture adsorbed from the water phase of your formulation. When applied, this water is released over a long period, providing moisture to the skin throughout the day.

Procedure for Baby Cream with CORN PO4 PH”B”

1. Heat phase A and B separately to approx. 80 °C.
2. Add phase B to phase A.
3. Homogenize.
4. Cool with gentle stirring to approx. 40 °C.
5. Add phase C.
6. Cool with gentle stirring to approx. 30 °C.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Clear Concepts for Clean Beauty!

The post Baby Cream with CORN PO4 PH”B” appeared first on -Glenn Corp-.

AGENAFLO 9050 is a lipophilic, hydrophobically modified, waxy corn starch that is an aluminum-free alternative to ”aluminum starch octenylsuccinate”. This ingredient absorbs excess moisture and sebum without whitening. It reduces tackiness and greasiness while giving skin a velvety appearance.

Procedure for Cushioned Liquid Talc with AGENAFLO 9050

1. Premix phase A.
2. Premix phase B and add to phase A mixing until fully hydrated.
3. Heat to 80°C.
4. Add phase C to phase A with mixing until homogenous.
5. Cool with stirring to 40°C and add phase D mixing until homogenous.

Specifications

pH: 5 – 6.5
Viscosity: 200,000 – 300,000; Brookfield DV-E, TC, 6 rpm, 20°C for 1 minute

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Clear Concepts for Clean Beauty!

The post Cushioned Liquid Talc with AGENAFLO 9050 appeared first on -Glenn Corp-.

The formulation features CORN PO4 PH”B” is a boiling-resistant conventional starch. This ingredient is a powder base for antimicrobial, disinfecting, astringent or keratolytic powder. It has long-lasting moisturizing effect and slow releases: Distarch phosphates ‘lock in’ moisture adsorbed from the water phase of your formulation. When applied, this water is released over a long period, providing moisture to the skin throughout the day.

Procedure for Liquid Baby Powder

1. Mix phase A and heat up to 75 °C.
2. Mix B separately and heat up to 75 °C.
3. Mix Phase A to aqueous phase and cool down to 45°C, whilst stirring.
4. Add Fragrance (Phase C) and homogenize with Ultraturax.
5. Cool down to 35°C whilst stirring.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Clear Concepts for Clean Beauty!

Liquid Baby Powder Formulation 

The post Liquid Baby Powder appeared first on -Glenn Corp-.

The formulation features CORN PO4 PH”B” is a boiling-resistant conventional starch. This ingredient is a powder base for antimicrobial, disinfecting, astringent or keratolytic powder. It has long-lasting moisturizing effect and slow releases: Distarch phosphates ‘lock in’ moisture adsorbed from the water phase of your formulation. When applied, this water is released over a long period, providing moisture to the skin throughout the day.

Procedure for Natural Diaper Rash Ointment

1. Mix Phase A and Phase B separately and heat up to 80 °C.
2. Mix Phase A to aqueous phase and cool down, whilst stirring, to 35 °C.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Clear Concepts for Clean Beauty!

The post Natural Diaper Rash Ointment appeared first on -Glenn Corp-.

The formulation features MAISITA 9040 is a physically treated native corn starch used as a rheology modifier. It  is produced by mashing, washing, and drying of corn followed by heat-treatment to reach a low plate count. This ingredient improves skin feel, reduces greasiness and stickiness of emulsions, and is a natural antiperspirant agent.

Procedure for Baby Wet Wipe with MAISITA 9040

1. Dissolve components of phase A.
2. Add phase B to phase A and homogenize.
3. Adjust pH to 6 with phase C.
4. Add phase D to phase ABC and homogenize.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Clear Concepts for Clean Beauty!

Formulation No. 757-1-3

The post Baby Wet Wipe with MAISITA 9040 appeared first on -Glenn Corp-.

This formulation features AGENAMALT 20.235 which is a free-flowing, very easily soluble powder with a low hygroscopic character and consists of a mixture of saccharides without any starch. This ingredient is is produced by saccharification and spray-drying of organic corn.

Procedure for Baby Wash Head to Toe

1. Part A Mixing until Homogeneous.
2. Prepare Part B mix and add to Part A Mixing until Homogeneous.
3. Prepare part C and add to batch mix together.
4. Adjust pH by Part D to 6.5-7.5 and add Part E, mixing well.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Clear Concepts for Clean Beauty!

Formulation No. CH-18-002

The post Baby Wash to Head to Toe appeared first on -Glenn Corp-.

PROCEDURE

1. Heat phase A to approx. 80 °C.
2. Add phase B (80 °C or room temperature) to phase A while stirring.
3. Homogenize.
4. Cool down below 30 °C and add phase C.
5. Homogenize again.

The post Treat Your Baby’s Booty Cream appeared first on -Glenn Corp-.