ZEODENT® 153 is a dental silica that is provides superior performance in toothpaste applications. This product, a dental thickener, is a cost-efficient solution to build suitable levels of viscosity without compromising on performance. It offers formulators a wide range of flexibility with regards to active ingredient compatibility and overall final product stand-up.

ZEODENT® 116 Silica acts as a cleaning agent. It has the highest ratio of cleaning to abrasion, making it ideally suited for formulations where a softer touch is required. This product is the gentlest cleaning silica that was specifically designed for those with sensitive, junior, or senior teeth.

Procedure for Sensitive Toothpaste

1. Weigh ingredients in advance.
2. Mix Phase 1 ingredients.
3. Phase 2 – disperse the cellulose gum into PEG-12. Then, add the remaining ingredients.
4. Combine Phase 1 and Phase 2 with high shear mixing at 1700 rpm for 30 minutes.
5. Add Phase 3 ingredients to combined Phase 1 and Phase 2. Mix under vacuum for 20 minutes.
6. Stop mixer. Add Phase 4 ingredients and mix under vacuum at half speed for 10 minutes.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Consumers are Driving a Breath of Fresh Air into the Oral Care Market!

The post Sensitive Toothpaste appeared first on -Glenn Corp-.

ZEODENT® 113 is a cost-efficient solution to achieve desired cleaning performance for standard toothpaste formulations. It offers formulators a wide range of flexibility with regards to active ingredient compatibility and overall final product stand up. ZEODENT® 116 Silica acts as a cleaning agent. It has the highest ratio of cleaning to abrasion, making it ideally suited for formulations where a softer touch is required. This product is the gentlest cleaning silica that was specifically designed for those with sensitive, junior, or senior teeth.

ZEODENT® 153 is a dental silica that is provides superior performance in toothpaste applications. This product, a dental thickener, is a cost-efficient solution to build suitable levels of viscosity without compromising on performance. It offers formulators a wide range of flexibility with regards to active ingredient compatibility and overall final product stand-up.

Procedure for Kids Toothpaste

1. Weigh ingredients in advance.
2. Mix Phase 1 ingredients.
3. Phase 2 – disperse the cellulose gum into PEG-12. Then, add the remaining ingredients.
4. Combine Phase 1 and Phase 2 with high shear mixing at 1700 rpm for 30 minutes.
5. Add Phase 3 ingredients to combined Phase 1 and Phase 2. Mix under vacuum for 20 minutes.
6. Stop mixer. Add Phase 4 ingredients and mix under vacuum at half speed for 10 minutes.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Consumers are Driving a Breath of Fresh Air into the Oral Care Market!

The post Kids Toothpaste appeared first on -Glenn Corp-.

ZEODENT® 165 is a dental thickener offering outstanding performance when building high levels of viscosity is essential. This is useful when formulating toothpaste that over extreme cleaning and whitening because most high cleaning silicas do not build sufficient viscosity on their own. ZEODENT® 165 also delivers exceptional optical clarity, making it the first choice when formulating toothpastes.

ZEODENT® 113 is a cost-efficient solution to achieve desired cleaning performance for standard toothpaste formulations. It offers formulators a wide range of flexibility with regards to active ingredient compatibility and overall final product stand up.

Procedure for Clear Gel Toothpaste

1. Weigh ingredients in advance.
2. Mix Phase 1 ingredients.
3. Phase 2 – disperse the cellulose gum into PEG-12. Then, add the remaining ingredients.
4. Combine Phase 1 and Phase 2 with high shear mixing at 1700 rpm for 30 minutes.
5. Add Phase 3 ingredients to combined Phase 1 and Phase 2. Mix under vacuum for 20 minutes.
6. Stop mixer. Add Phase 4 ingredients and mix under vacuum at half speed for 10 minutes.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Consumers are Driving a Breath of Fresh Air into the Oral Care Market!

The post Clear Gel Toothpaste appeared first on -Glenn Corp-.

ZEODENT® 165 is a dental thickener offering outstanding performance when building high levels of viscosity is essential. This is useful when formulating toothpaste that over extreme cleaning and whitening because most high cleaning silicas do not build sufficient viscosity on their own. ZEODENT® 165 also delivers exceptional optical clarity, making it the first choice when formulating toothpastes.

ZEODENT® 113 is a cost-efficient solution to achieve desired cleaning performance for standard toothpaste formulations. It offers formulators a wide range of flexibility with regards to active ingredient compatibility and overall final product stand up.

Procedure for Anticavity Toothpaste

1. Weigh ingredients in advance.
2. Mix Phase 1 ingredients.
3. Phase 2 – disperse the cellulose gum into PEG-12. Then, add the remaining ingredients.
4. Combine Phase 1 and Phase 2 with high shear mixing at 1700 rpm for 30 minutes.
5. Add Phase 3 ingredients to combined Phase 1 and Phase 2. Mix under vacuum for 20 minutes.
6. Stop mixer. Add Phase 4 ingredients and mix under vacuum at half speed for 10 minutes.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Consumers are Driving a Breath of Fresh Air into the Oral Care Market!

The post Anticavity Toothpaste appeared first on -Glenn Corp-.

AEROSIL® 200 Pharma is a high purity amorphous anhydrous colloidal silicon dioxide for use in pharmaceutical products. This ingredient is a free-flow and anti-caking agent that improves powder properties. It has no influence on taste.

Procedure for Enhanced Whitening Toothpaste

1. Weigh ingredients in advance.
2. Mix Phase 1 ingredients.
3. Phase 2 – slowly add cellulose gum to sorbitol.
4. Combine Phase 1 and Phase 2 with high shear mixing at 1700 rpm for 30 minutes.
5. Add Phase 3 ingredients to combined Phase 1 and Phase 2. Mix under vacuum for 20 minutes.
6. Stop mixer. Add Phase 4 ingredients and mix under vacuum at half speed for 10 minutes.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Consumers are Driving a Breath of Fresh Air into the Oral Care Market!

The post Enhanced Whitening Toothpaste appeared first on -Glenn Corp-.

ZEODENT® 103 is Evonik’s highest cleaning silica that offers excellent cleaning and whitening when used as a stand-alone abrasive, or it can be used as a “booster” in combination with ZEODENT® 113 cleaning silicas.At varying dosage levels, ZEODENT® 103 allows formulators to achieve a broad range of cleaning and whitening performance.

ZEODENT® 165 is a dental thickener offering outstanding performance when building high levels of viscosity is essential. This is useful when formulating toothpaste that over extreme cleaning and whitening because most high cleaning silicas do not build sufficient viscosity on their own. ZEODENT® 165 also delivers exceptional optical clarity, making it the first choice when formulating toothpastes.

Procedure for Whitening Toothpaste

1. Weigh ingredients in advance.
2. Mix Phase 1 ingredients.
3. Phase 2 – disperse the cellulose gum into PEG-12. Then, add the remaining ingredients.
4. Combine Phase 1 and Phase 2 with high shear mixing at 1700 rpm for 30 minutes.
5. Add Phase 3 ingredients to combined Phase 1 and Phase 2. Mix under vacuum for 20 minutes.
6. Stop mixer. Add Phase 4 ingredients and mix under vacuum at half speed for 10 minutes.

Looking for more ideas and innovations for your next project? Check out our featured Grow Your Know: Consumers are Driving a Breath of Fresh Air into the Oral Care Market!

The post Whitening Toothpaste appeared first on -Glenn Corp-.

Mild transparent-opaque toothpaste including RHEANCE One, a Glycolipid for the development of mild but well foaming formulations, important features of toothpastes. To support the mildness approach, the formula is Sulfate-, and CAPB-free.

Procedure:

Phase A: Disperse the Blanose into the water. Swelling time: 45-60 min. After swelling process, humectants are dispersed.
Phase B: Components of Phase B are added while mixing, using vacuum if necessary. Mixing time: 5-10 min.
Phase C: Components of C are added to the premixed dispersion by using low mixing speed. After that, mixing speed is increased. During mixing process vacuum is started. Mixing time: approx. 15-20 min.
Phase D: During mixing process, flavor oil is added.
Phase E: Components of E are added by using low mixing speed. After that, the whole mixture must be dispersed by using vacuum for about 10 min.
Finished toothpaste can be filled into tubes.

The post Kids Toothpaste appeared first on -Glenn Corp-.

CONSIDER CUSTOMIZING THIS FORMULA:

• MICROZEST 50 PEARL – can replace MICROZEST 25 BAMBOO as abrasive agent.
• GREEN MICROZEST 50 CHARCOAL – can be used for teeth whitening.
• MICROZEST 50 CRANBERRY – is known to inhibit the growth of many oral bacteria.
• MICROZEST 50 ASCOPHYLLUM – can be used to prevent plaque formation.

The post Tooth Powder appeared first on -Glenn Corp-.

Formula No.: 1611-6

PROCEDURE:

A: Disperse the Blanose into the water. Swelling time: 30-45 min. After swelling process, humectants are dispersed.
B: Components of Phase B are added while mixing, using vacuum if necessary. Mixing time: 5-10 min.
C: Components of C are added to the premixed disperision by using low mixing speed. After that, mixing speed is increased. During mixing process vacuum is started. Mixing time: approx. 15-20 min.
D: During mixing process, oils are added.
E: Components of E are added by using low mixing speed. After that, the whole mixture must be dispersed by using vacuum for about 10 min.
Finished toothpaste can be filled into tubes.

pH =6,65 (diluted with 3 parts water acc. to ISO 11609).

The post Toothpaste, white appeared first on -Glenn Corp-.

Formula No.: 1611-7

PROCEDURE:

A: Disperse the Blanose into the water. Swelling time: 30-45 min. After swelling process, humectants are dispersed.
B: Components of Phase B are added while mixing, using vacuum if necessary. Mixing time: 5-10 min.
C: Components of C are added to the premixed disperision by using low mixing speed. After that, mixing speed is increased. During mixing process vacuum is started. Mixing time: approx. 15-20 min.
D: During mixing process, flavor oil is added.
E: Components of E are added by using low mixing speed. After that, the whole mixture must be dispersed by using vacuum for about 10 min.
Finished toothpaste can be filled into tubes.

pH =6,65 (diluted with 3 parts water acc. to ISO 11609).

The post Toothpaste, translucent appeared first on -Glenn Corp-.